DC Maschinengewindebohrer M DIN 371 Typ N320-4 HSSE Durchgangsloch
-
- 562170000
- Maschinengewindebohrer
- HSSE
- unbeschichtet
- DIN 371
- DC SWISS
- N320-4
Anwendungsgruppen:
61 Reinkupfer (Elektrolytkupfer) < 400 N/mm2
63 Messing (langspanend) < 700 N/mm2
71 Al unlegiert < 350 N/mm2
72 Al legiert Si < 1.5 % < 500 N/mm2
73 Al legiert Si > 1.5 % - < 10 % < 400 N/mm2
81 Thermoplaste
61 Reinkupfer (Elektrolytkupfer) < 400 N/mm2
63 Messing (langspanend) < 700 N/mm2
71 Al unlegiert < 350 N/mm2
72 Al legiert Si < 1.5 % < 500 N/mm2
73 Al legiert Si > 1.5 % - < 10 % < 400 N/mm2
81 Thermoplaste
| d1 | P mm | l1 mm | PK (ST) | Katalogpreis in CHF per 1 ST | |||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | |||||||||
| M 1 | 0.25 | 40 | 1 | 39.90 | |||||
| M 1.1 | 0.25 | 40 | 1 | 52.70 | |||||
| M 1.2 | 0.25 | 40 | 1 | 41.15 | |||||
| M 1.4 | 0.30 | 40 | 1 | 39.90 | |||||
| M 1.5 | 0.30 | 40 | 1 | 44.50 | |||||
| M 1.6 | 0.35 | 40 | 1 | 36.25 | |||||
| M 1.7 | 0.35 | 40 | 1 | 39.05 | |||||
| M 1.8 | 0.35 | 40 | 1 | 39.05 | |||||
| M 2 | 0.40 | 45 | 1 | 27.95 | |||||
| M 2.2 | 0.45 | 45 | 1 | 35.35 | |||||
| M 2.3 | 0.40 | 45 | 1 | 35.35 | |||||
| M 2.5 | 0.45 | 50 | 1 | 25.85 | |||||
| M 2.6 | 0.45 | 50 | 1 | 27.50 | |||||
| M 3 | 0.50 | 56 | 1 | 23.20 | |||||
| M 3.5 | 0.60 | 56 | 1 | 26.45 | |||||
| M 4 | 0.70 | 63 | 1 | 23.20 | |||||
| M 5 | 0.80 | 70 | 1 | 23.20 | |||||
| M 6 | 1.00 | 80 | 1 | 23.30 | |||||
| M 8 | 1.25 | 90 | 1 | 27.15 | |||||
| M 10 | 1.50 | 100 | 1 | 32.95 | |||||
